    HDL.

     DiSEqC   1530. 
      diceq_x4.c     .

         , 
   .

       st20 (     !) 
      1530.

     MediasatConnect by julekjulek.

    "MHWpatch",      "File:", 
  "File name:"  "Section"   .      "PT" 
    6 ,  "PTDISEQ".
   ", 3, "   "Send"   MediasatConnect    . 
         . 
     .

         " ", 
            
  " "      . 
      .


=================================================================================

How to use the HDL patch function

Let's get a load at this taken as an example the function of DiSEqC switch (for now only for 1530 model).
In the file you can find the function of DiSEqC 4x1 switch with patch data added.

In case you need to change the functionality of switch, this can be done through changing its main code,
e.g. for the monoblock.

Then having compiled the code in standard way for ST20 (no need to change anything in the out binary!!!)
you can get to loading the patch into 1530.

To load the patch we'll use MediasatConnect by julekjulek.

Open "MHWpatch" and drag and drop the compiled file into "File:" field,next in "File name:" and "Section"
please provide the name of the patch, which should necessarily begin with PT-header, and then it must
contain not more than 6 symbols (8 all in all,that is), e.g. "PTDISEQ".
Press  "MENU, 3, D" on your remote and press "Send" in MediasatConnect, thus sending your file to tuner.
After the file is loaded you will need to restart you tuner by pressing POWER on the remote.
Only doing this will make the patch active.

Alas, we cannot delete in this very way any folder from the channels flash, so in case you
do not need the patch you can delete it only by its full erasure, that is deleting lists of channels
and other settings.After you did this the function would work by default.

Good luck
==========
English by YARO
18.07.2008
17:32 local time.
==================
